COMBINATION FALL PROTECTION
AND CONSTRUCTION
ANCHORAGE VERIFICATION DEVICE
Combination Fall Protection and Construction Anchorage Verification Device for proof-testing both fall protection and construction anchorage applications.
Kit includes:
-
Veri5000 2” Tester with quick release coupler
-
Load spreading bridge
-
3 adjustable aluminum legs pins and swivel feet
-
Locking adaptor
-
Bolt tester adaptor
-
Ringbolt adaptor clevis
-
Threaded button adaptors in 1/4”, 5/16”, 3/8”, 1/2”
-
Slotted button adaptors in 4.5, 5.5, 6.5, 8.5,10.5 & 12.5
-
Ball driver, spare screws and Allen keys.
Kit supplied in a padded carrying case with 12 months calibration and full operating instructions.
FPCAVD-D - comes with Digital 0-30kN/lb/f Bluetooth Gauge
PROOF-TEST SAFELY
VERI5000™ requires the user to read the manual in its entirety prior to use of the equipment. User should wear appropriate personal protective equipment when performing a proof-test. After each proof test a Competent Person or person who has been trained as a Competent Equipment Inspector must inspect the equipment for cracking, breaking, or permanent deformation of the structure and equipment (OSHA 1910.66 and 1926.502) If the Equipment Inspector or Competent Person is inspecting another manufacturers product that he or she has not been trained on, they must refer to the manufacturer’s instruction manual for the proper inspection of the anchor. Some anchors may deform during a proof-test and still hold, therefore meeting their intended purpose. Please consult the Manufacturer of the anchor with any questions on the product and as always, remove any deformed anchors from use. When choosing what to proof-test to, picking the lowest force that meets the requirements will greatly reduce the risk of breaking, cracking or deforming anchors. Pulling anchors to the maximum of 5000lbs may deform the anchor. VERI5000 and or Hydrajaws are not responsible for any damage to the structure being tested.